Finishes and formats
Choose the surface by pool area. Choose the format by its geometry.
Natural
Sawn cut
Semi-smooth surface obtained with a cutting disc. It is the stone's natural finish.
- Typical use
- Pool shell: floor and walls.
- Why
- Easy to clean and it enhances the emerald colour of the water.
- Formats
- 10×10 cm, 20×10 cm, 20×20 cm
- Thickness
- ≈ 1 cm
Textured
Rough surface
Surface with natural relief and a more rustic look.
- Typical use
- Copings, surrounds and walkways.
- Why
- More texture underfoot. If you need a specific slip-resistance class, ask for the batch documentation.
- Formats
- 10×10 cm, 20×10 cm, 20×20 cm
- Thickness
- 1-1.5 cm
Three formats
Drawn to the same scale.
10×10 cm
Mosaic look. Adapts to curves, steps and benches.
20×10 cm
A balance between appearance and laying speed.
20×20 cm
Fewer joints and a calmer read on large, straight surfaces.
All pieces are approximately 1 cm thick. In the textured finish, the natural surface may vary between 1 and 1.5 cm.
Comparison
| Natural | Textured | |
|---|---|---|
| Surface | Semi-smooth surface obtained with a cutting disc. It is the stone's natural finish. | Surface with natural relief and a more rustic look. |
| Typical use | Pool shell: floor and walls. | Copings, surrounds and walkways. |
| Why | Easy to clean and it enhances the emerald colour of the water. | More texture underfoot. If you need a specific slip-resistance class, ask for the batch documentation. |
| Thickness | ≈ 1 cm | 1-1.5 cm |
No sample photos on this page: we prefer not to present generic images as the exact finish. If you want to see the available batch, ask us.